Consider Staining Your Concrete Floor

A common concrete floor can be made by acid staining to look like pricey natural flagstone flooring. Not only is it a fraction of the price, but for individuals allergic to carpeting materials it’s a godsend.

The procedure for staining a concrete floor, while not too complex, can be tough to get the results you want from. Most people are likely better off hiring a professional contractor. It’s a high-risk job for the do-it-yourselfer.

Concrete stain isn’t a paint or finish coating if you’re not familiar with it. It entails a chemical reaction on cement. Usually a water-based solution of hydrochloric acid and inorganic salts, the stain reacts with minerals and lime in the concrete aggregate, and the outcome of the reaction is coloring. It works on old or new concrete, and is pretty lasting since it won’t chip or stain if you keep it with wax or sealer. Additionally, it may be applied to both outdoor floors and interiors. Verandas and walks, toilets, entrances, driveways, living rooms are all fair game.

Stained concrete looks a little like marble, but dappled and less uniform when it’s concluded. The concrete will largely be earthy brown tones, with hints of green and red. It’s possible to make your own tint stain by applying at dissimilar speeds, or blending colors. When you stain a concrete floor, however, don’t expect the stain to be uniform or have an even tone. Plan your room décor and color scheme accordingly, because you will get reactions that are dissimilar from distinct places of the concrete, as well as an experienced expert will be hard pressed to predict what the final result will be.

Surface prep for acid staining concrete is dependent upon what condition your slab is in. Just poured concrete needs that are simply is be permitted time for curing- three weeks after pouring- afterward some rinsing and scrubbing. Concrete that is older is a story that is different. Do a little test region to make sure it’s ready.

Newer poured concrete will need less stain than older floorings, but in general, a gallon of water will cover around 400 square feet. Apply the stain with a non metallic brush or broom, working in the cooler morning or evening hours, rather than in the warmth of the day. Be attentive to protect yourself in the acid stain from drips, spillage and fumes, and follow the maker’s precautions.

By sweeping away deposits and any left over stain with a broom after use, you need to cleanup. It really is advisable to apply a sealer agent and then wax it, when the floor is completely dry.

If you’re in the marketplace for natural stone flooring, a new look for the basement or patio, or simply searching for new concrete finishing ideas, stained concrete is something you should look into.